Configuring The Silkworm 3800 - Brocade Communications Systems SilkWorm 3800 Hardware Reference Manual

2
Installing and Configuring the SilkWorm 3800
Item 7
Figure 2-3
Item 10
Figure 2-4

Configuring the SilkWorm 3800

The SilkWorm 3800 must be configured to ensure correct operation within a network and fabric.
For instructions about configuring the switch to operate in a fabric containing switches from other
vendors, refer to the Brocade Fabric OS Procedures Guide.
For more information about the commands used in this procedure, refer to the Brocade Fabric OS
Reference.
2-10
Item 11
Rail
Item 2
Method A
Installing the Switch to Slide Out the Exhaust-air Side of a Cabinet that has
Square-Holed Rails
Item 2
Rail
Method A
Installing the Switch to Slide Out the Cool-air Side of a Cabinet that has
Square-Holed Rails
Item 2
Item 11
Item 7
Item 10
Item 9
Item 8
Item 16
Item 6
Rail
Item 8
Item 9
Method B
Item 2
Item 16
Rail
Method B
SilkWorm 3800 Hardware Reference
Item 6