GE 239 Instruction Manual page 21

CHAPTER 2: INSTALLATION
1 2
GE Power Management
MAXIMUM CONTACT RATING
MAXIMUM CONTACT RATING
250 VAC 10A RESISTIVE
250 VAC 10A RESISTIVE
1/4HP 125VAC 1/2HP 250VAC
1/4 HP 125VAC 1/2HP 250VAC
®
MADE IN CANADA NRTL
MANUAL PART NO.
239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
The information included on the product label is explained below:
3 4 5
MODEL
239-RTD-AN
SUPPLY VOLTAGE
SUPPLY VOLTAGE
TAG# 1234-567-89
TAG#
1. MODEL NO: The model number shows the configuration of the relay. The model
number for a basic unit is 239. RTD and AN will appear in the model number only if the
RTD option or Analog Output option is installed. H will appear in the model number if
conformal coating is required.
2. SUPPLY VOLTAGE: Indicates the 239 power supply input configuration. The 239 shown
above can accept any AC 50/60Hz voltage from 70 to 265 V AC or DC voltage from 90
to 300 V DC.
3. TAG#: This is an optional identification number specified by the customer.
4. MOD#s: These are used if unique features have been installed for special customer
orders. These numbers should be available when contacting GE Multilin for technical
support. Up to five MOD#s can be installed into the 239.
5. SERIAL NO: Indicates the serial number for the 239 in numeric and barcode format.
The following table shows the revision history of the 239. Each revision of the instruction
manual corresponds to a particular firmware revision in the 239. The instruction manual
revision is located on the first page of the manual as part of the manual P/N (1601-00XX-
Revision). The 239 firmware revision is loaded in the relay and can be found by scrolling to
the display message
When using the manual to determine relay features and settings, ensure that the revision
corresponds to the 239 firmware revision using the table below. For a large instruction
manual (8.5" × 11") the part number is 1601-0067; for a small instruction manual (5.5" ×
7.25") it is 1601-0060.
Table 2–1: Firmware/manual Revisions Table
FIRMWARE
VERSION
1601-00XX-C6
1601-00XX-C7
1601-00XX-C8
1601-00XX-D1
1601-00XX-D2
1601-00XX-D3
6 7 8
FIRMWARE
90-300VDC 20VA
SERIAL NO.:
70-265VAC 50/60HZ 20VA
MOD#s NONE
MOD#
FIGURE 2–2: 239 Product Label (Example)
A3: PRODUCT INFO\FIRMWARE VERSIONS\MAIN PROGRAM VER
MANUAL PART NO.
2.10 1601-00XX-D5
2.11 1601-00XX-D6
2.12 1601-00XX-D7
2.20 1601-00XX-D8
2.30 1601-00XX-D9
2.3x 1601-00XX-DA
9 10 11 12
64D240C4.000
110.000
D6401234
819790AH-X4.CDR
FIRMWARE
VERSION
2.40
2.50
2.51
2.51
2.6x
2.6x
.
2–15