GE 239 Instruction Manual page 117

CHAPTER 6: User Interface
Note
239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
Creating a New Settings File
The EnerVista 239 Setup software allows the user to create new Settings files independent
of a connected device. These can be uploaded to a relay at a later date. The following
manual procedure illustrates how to create new Settings Files.
In the File pane, right click on File.
Select the New Settings File item.
The EnerVista 239 Setup software displays the following window,
allowing the configuration of the Settings File as shown below.
It is important to define the correct firmware version to ensure that settings not available
in a particular version are not downloaded into the relay
Select the file name and path to store the file, or select any displayed
file name to update an existing file.
To select the file name and path for the new file, click the button
beside the File Name box [...].
All 239 Settings Files should have the extension '239' (for example,
'motor1.239').
Select the Firmware Version for the new Settings File.
For future reference, enter some useful information in the
Description box to facilitate the identification of the device and the
purpose of the file.
Select the appropriate Options for your new Settings File.
Select the appropriate MOD(s) for your new Settings File.
Click OK to complete the process.
Once this step is completed, the new file, with a complete path, will
be added to the EnerVista 239 Setup software environment.
6–81