GE 239 Instruction Manual page 110

CHAPTER 6: User Interface
Click the Add Site button to define a new site.
Enter the desired site name in the Site Name field.
If desired, a short description of site can also be entered along with
the display order of devices defined for the site. In this example, we
will use "Substation 2" as the site name.
Click the OK button when complete.
The new site will appear in the upper-left list in the EnerVista 239 Setup window.
Click the Add Device button to define the new device.
Enter the desired name in the Device Name field and a description
(optional) of the site.
Select Ethernet from the Interface drop-down list.
This will display a number of interface parameters that must be
entered for proper Ethernet functionality.
Enter the IP address assigned to the MultiNET adapter.
Enter the slave address and Modbus port values (from the
S1 239
menu) in the Slave Address and
SETUP 239 COMMUNICATIONS
Modbus Port fields.
Click the Read Order Code button to connect to the 239 device and
upload the order code.
If an communications error occurs, ensure that the 239 Ethernet
communications values entered in the previous step correspond to
the relay and MultiNET setting values.
Click OK when the relay order code has been received.
The new device will be added to the Site List window (or Online
window) located in the top left corner of the main EnerVista 239
Setup window.
6–74 239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com