GE 239 Instruction Manual page 129

CHAPTER 6: User Interface
239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
Click the OK button when complete.
The new site will appear in the upper-left list in the EnerVista 239
Setup window.
Click the Add Device button to define the new device.
Enter the desired name in the Device Name field and a description
(optional) of the site.
Select the appropriate communications interface (Ethernet or Serial)
and fill in the required information for the 239.
See Connecting EnerVista 239 Setup to the Relay on page 6–72 for
details.
FIGURE 6–4: Device Setup Screen (Example)
Click the Read Order Code button to connect to the 239 device and
upload the order code.
If a communications error occurs, ensure that communications
values entered in the previous step correspond to the relay setting
values.
Click OK when complete.
From the EnerVista main window, select the IED Dashboard item to
open the Plug and Play IED dashboard.
An icon for the 239 will be shown.
6–93