Sea Tel 9711-92 Installation And Operation Manual page 43

9711-92 Ku-Band TXRX
9.
10. Hook the two lifting strap S-
11. Unbolt the reflector from the
12. Using a crane, or other
13. Assure that the reflector is
14. Install the reflector onto the
15. Disconnect the S-hooks from
Attach two small S-hooks to
two web lifting straps.
hooks into the end of the
tubing of the left & right feed
struts.
raised platform of the
Baseframe & Reflector crate.
suitable lifting apparatus, lift
the reflector up and onto the
reflector mounting brace of
the pedestal.
orientated to align the
waveguide filters mounted on
the top feed strut to the
waveguide flex section from
the BUC Enclosure.
reflector mounting brace
using the hardware provided.
Apply Loctite to and tighten
the mounting bolts.
the feed struts.
3-21
Installation