Sea Tel 9711-92 Installation And Operation Manual page 29

9711-92 Ku-Band TXRX
12. Insert the Ku-Band drop-in
Alignment mark (scribed into the
bottom end of the feed assembly)
13. Apply Loctite 242 to, install
feed assembly with the
alignment aligned to the
center of strut #2 (right strut
as view from the front of the
reflector)
and tighten the eight screws
(see red arrows) through the
front of the scalar plate and
into the end of the drop-in
feed assembly.
3-7
Installation