Table of Contents
Advertisement
Operation
Test Mode
Auto Test To perform an auto test of the Maverick MK2 Spot functions, follow the instructions below:
1.
2.
3.
4.
5.
Manual Test To test the functions of the product manually, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
System Information
All information about the cur ent status of the Maverick MK2 Spot is available through the product's
Sys Info menu. To view this nformation, follow the instructions below:
1.
2.
3.
4.
5
6
-18-
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says
Test.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test.
Press <ENTER>.
Press <MENU> repeatedly until the Home Screen shows on the display. Pre s <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says
Test.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Manual test, or touch the display whe e it says Manual test.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select the function to test, from P
Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking Cy
Color, Gobo, Gobo Rotate, Gobo 2, Gobo 2 Rotate
Zoom Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro CMY Macro Speed, or Special
Function, or touch the display where it says the esired unction.
If using the buttons instead of the touchscre n, p ess <ENTER>.
Change the value of the tested function with o e of the following methods:
·
Type the desired value using the number pad that shows on the touchscreen display.
or
·
Use <UP>, <RIGHT>, <DOWN>, r <LEFT> to increase or decrease the value.
Press <ENTER>.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Information, or touch the display where it
says Informat on.
If using th bu on instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running
mode, s arting address, etc.), Fan Information (shows speed of the head fans in rpm), Error
Information (shows any errors or No Error!), or Channel Information (shows the current value
of al s gnal input channels) or touch the display where it says the desired option.
Press <ENTER>.
U e <UP> or <DOWN> to scroll through the information.
Pa Fine, Tilt, Tilt Fine, P/S
, Magenta, Yellow, CTO,
ocu
Focus Fine, Focus Auto, Zoom,
Maverick MK2 Spot User Manual Rev. 4
Advertisement
Table of Contents
