Winmate R12IBWS-MHM2 Quick Start Manual

M-series hmi & box pc
Hide thumbs Also See for R12IBWS-MHM2:

Advertisement

Quick Links

For more information on this and other Winmate
products, please visit our website at:
www.winmate.com
Document Part Number: 915211101023
Please read these instructions carefully before using this product, and save this manual for future use.
HMI & Box PC
Quick Start Guide
R12IBWS-MHM2
R15IBWS-MHC3
R17IBWS-MHM1
R19IBWS-MHA1
W22IBWS-MHA3
IBMH100
IHMH100
IKMH100
M-Series
V1.1
R12IHWS-MHM2
R15IHWS-MHC3
R17IHWS-MHM1
R19IHWS-MHA1
W22IHWS-MHA3
R12IKWS-MHM2
R15IKWS-MHC3
R17IKWS-MHM1
R19IKWS-MHA1
W22IKWS-MHA3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R12IBWS-MHM2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Winmate R12IBWS-MHM2

  • Page 1 R15IKWS-MHC3 IKMH100 R17IKWS-MHM1 R19IKWS-MHA1 W22IKWS-MHA3 For more information on this and other Winmate products, please visit our website at: www.winmate.com Document Part Number: 915211101023 Please read these instructions carefully before using this product, and save this manual for future use.
  • Page 2 FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference.  This device must accept any interference received  including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "B"...
  • Page 3 Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Winmate Inc. reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability...
  • Page 4 Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may need the following information ready before you call: ...
  • Page 5: Table Of Contents

    CONTENTS INTRODUCTION Features Package Contents Product Overview System Introduction Display Box PC GETTING STARTED Turning On Your Device Connecting to AC Power Source Connecting to DC Power Source Turning Off Your Device INSTALLATION Wiring Requirements Mounting Panel Mounting VESA Mounting System Modifications Detaching Box PC from Display Attaching Box PC to the Display...
  • Page 7: Introduction

    INTRODUCTION Congratulations on purchasing Winmate® M-Series HMI. M-Series HMI is designed to provide versatile and cost-effective solution for your industrial needs. P-CAP multi-touch screen equipped with industrial motherboard offers various input/ output connectors. Fanless cooling system and powerful processor assures steady performance and silent functioning.
  • Page 8: Package Contents

    Package Contents Carefully remove the box and unpack your device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. Standard factory shipment list: Quick Start Guide Driver CD &...
  • Page 9: Product Overview

    Product Overview System Introduction M-Series HMI is a flexible modular system that consists of the Front Display and detachable Box PC from the rear side. Modular system design allows easy repair and modifications.
  • Page 10: Display

    Display Display Front View Display Side and Rear Views...
  • Page 11: Box Pc

    Box PC Box PC Front View Box PC Top View Box PC Bottom View...
  • Page 12 Input and Output Connectors Layout Intel® Atom™ Description Description ① 12-24V DC with isolation ⑧ COM1 ② LAN ⑨ Audio in ③ LAN ⑩ Audio out ④ USB 2.0 x 2 ⑪ HDD indicator ⑤ USB 2.0 x 2 ⑫ Reset ⑥...
  • Page 13 Intel® Core™ i5 5200U Description Description PCIe Slot cover for PCIe x 4 ① ⑨ COM2 (1 x Half-length PCIe card) ② ⑩ 12-24V DC with isolation COM1 2.5” SSD Bay x 2 ③ ⑪ ④ ⑫ Audio out ⑤ ⑬...
  • Page 14 Intel® Core™ i5 6200U Description Description PCIe Slot Cover for one half- ① ⑩ Mic in length PCIe x4 card 2.5” HDD x 1 ② ⑪ 9-29V isolation DC-in ③ ⑫ Giga LAN Expansion slot (Preliminary)* ④ ⑬ Giga LAN Line in ⑤...
  • Page 15: Getting Started

    GETTING STARTED Turning On Your Device The HMI device will automatically turn on when connected to the power source. Connecting to AC Power Source To connect the HMI to AC power source: 1. Plug one end of the terminal block cable firmly to the DC Jack. 2.
  • Page 16: Connecting To Dc Power Source

    Connecting to DC Power Source To connect the HMI to DC power source: 1. Insert the exposed wires of the DC Power Cable to the appropriate connectors on the terminal block plug. 2. Plug the terminal block plug firmly to the DC IN Jack. 3.
  • Page 17: Turning Off Your Device

    Turning Off Your Device You can Turn OFF the HMI device with the Windows power settings. To shut down the device: 1. Tap Start >Shut down. 2. Wait for your HMI device to completely turn off before disconnecting the power cord (if necessary).
  • Page 18: Installation

    INSTALLATION Wiring Requirements The following common safety precautions should be observed before installing any electronic device:  Strive to use separate, non-intersecting paths to route power and networking wires. If power wiring and device wiring paths must cross make sure the wires are perpendicular at the intersection point. ...
  • Page 19: Mounting

    Mounting M-series HMI devices come with different mounting options suitable for most of the industrial and commercial applications. Panel Mounting Panel mounting solution allows installing the HMI device onto the wall or instrument panel. M-Series comes with the mounting clamps and screws for fast and easy mounting.
  • Page 20 To mount the device to a sub frame or panel, do the following: NOTE: Use either short (15mm) or long (30mm) screws based on the thickness of the wall.
  • Page 21: Vesa Mounting

    100 x 100 mm VESA M4 x 5 mm Swing arms mounting kits Mounting Instruction: Screw VESA Bracket to the fixture (ex. wall) with M4 VESA screws. Place the device on VESA bracket (not supplied by Winmate). *With customer’s bracket...
  • Page 22: System Modifications

    System Modifications Detaching Box PC from Display M-Series system is versatile solution that allows easy transportation of each part of the system. To detach the Box PC from the front display unit: 1. Turn off the device and disconnect the power source and peripherals. 2.
  • Page 23 4. Push the Box PC upward to disengage the Box PC from it is connector and the hook on the display unit. 5. Carefully separate the Box PC from the second hook located at the bottom of the display.
  • Page 24 6. Box PC and Display Unit are completely detached.
  • Page 25: Attaching Box Pc To The Display

    Attaching Box PC to the Display To install the Box PC onto the display unit, do the following: 1. Position the Box PC against the mounting plate and insert the hook (located on the bottom of the display) into the hook slot on the Box PC located on the bottom of the Box PC.
  • Page 26 3. Attach the screws to secure the Box PC to the display unit.
  • Page 27: Service

    SERVICE Service Access To access the RAM, internal SSD, Fuse, and PCI Card Slot do the following: Remove the PCI card/ RAM/ Internal SSD/ Fuse: 1. Turn the device right-side up, with the back toward you. 2. Loosen two Philips M3x5 screws that secure side cover. 3.
  • Page 28 4. Remove PCI card/ RAM/ Internal SSD/ Fuse. Reverse this procedure to install the PCI card/ RAM/ Internal SSD/ Fuse.
  • Page 29: Hard Disk Replacement

    Hard Disk Replacement To remove the hard disk: 1. Loosen by hand one thumbscrew on the rear bottom side of the device. In order to loosen the screw slightly push the screw and turn it to the left. 2. Open the cover door. 3.
  • Page 30: Appendix

    APPENDIX Appendix A: Cleaning the Monitor Before cleaning:  Make sure the device is turned off.  Disconnect the power cable from any AC outlet. When cleaning:  Never spray or pour any liquid directly on the screen or case. ...
  • Page 31 NOTES ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________...
  • Page 32 NOTES ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________...
  • Page 33 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: www.winmate.com...

Table of Contents