Table of Contents
Advertisement
Reinstalling the headlight assembly
Fig. 171 Anchors 1 and connector plug 2 of the left headlight assembly.
Fig. 172 In the engine compartment: Release lever for the left headlight.
Please first read and note the introductory information and heed the WARNINGS
Please carry out each step only in the order specified:
1.
2.
Connect the headlight assembly connector plug ⇒
3.
Slide the four headlight assembly anchors
4.
Secure the headlight assembly. Use the Phillips screwdriver from the vehicle tool kit to turn
5.
Turn the screwdriver about 50° in the direction of the
the arrow), until you hear a "click" (turn clockwise for the left headlight; turn
6.
Make sure that the red mark on the release lever is no longer visible. If you can still see the
red mark on the release lever, the headlight assembly is not installed correctly and you must
Please review and follow the checklist
(1)
into the four slots in the headlight opening.
the release lever ⇒
f ig. 168
symbol ⇒
W
counterclockwise for the right headlight).
reinstall it.
f ig. 171
(2).
(1).
f ig. 172
(in the direction of
Advertisement
Table of Contents
