Table of Contents
Advertisement
Color
Current strength in amps
(ATO/MINI)
Red
10
Blue
15
Yellow
20
White or
25
clear
Green
30
Orange
40
Pink
30
Opening the fuse box in the instrument panel
Open the storage compartment ⇒
On the back of the cover there are plastic tweezers for removing and inserting fuses.
Press the sides of the storage compartment in slightly
arrow).
To install, guide the cover from the bottom into the instrument panel and push in the direction
opposite to the arrows (A), then push forward until you can hear it latch into place.
Opening the fuse box in the engine compartment
Open the engine hood
, Working in the engine compartment.
Move the release tabs in the direction of the arrows ⇒
Remove the cover upward.
To install push the cover onto the fuse box. The locking tabs must latch with an audible "click."
NOTICE
To help prevent vehicle damage, be careful when removing fuse box covers and be sure to
reinstall them properly.
Open fuse boxes must be protected from dirt and moisture. Dirt and moisture in fuse boxes
can cause damage to the electrical system.
The vehicle contains other fuses in addition to those mentioned in this section. Have these fuses
replaced by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
Current strength in amps
(JCASE)
50
20
60
—
40
—
30
f ig.
164, Storage areas.
((A)
arrows) while pulling back firmly
f ig. 165
to unlock the fuse box cover.
((B)
Advertisement
Table of Contents
