Table of Contents
Advertisement
Please carry out each step only in the order specified:
⇒
f ig. 169
Low beam headlights / high beam
headlights
1.
2.
3.
4.
Turn the plastic cover
5.
Disconnect the connector plug (2).
6.
Release the clamp by pressing it B
forward and releasing both sides in the
direction of the arrows.
7.
Turn the clamp to the side and remove
the light bulb.
8.
Replace the burned out light bulb with a new bulb of the same type.
Insert the bulb in the headlight assembly
9.
and return the clamp to the closed
position B.
Resecure the clamp by pressing it
forward and against the direction of the
arrows ⇒
10.
f ig. 169
B. Pull the bulb lightly
to make sure the clamp is securely
fastened.
Replace the plastic cover
11.
12.
The illustrations show the left headlight assembly from the rear. The right headlight assembly is
the mirror image of the left headlight assembly.
Different models may have different lights, and the location and design of covers, bulb holders,
and bulbs may be in a different location than shown in the illustrations.
You cannot replace the LEDs in LED daytime running lights or LED parking lights within the
headlight assembly. Contact your authorized Volkswagen dealer or an authorized Volkswagen Service
Facility for assistance.
(2)
Parking lights / daytime running lights
Please review and follow the checklist
Open the engine hood
Remove the corresponding headlight assembly
(1)
counterclockwise (arrow) and remove.
Pull out the bulb holder
Pull the light bulb straight out of the bulb
Insert the bulb holder into the headlight
assembly and slide it in completely. The bulb
holder must latch with an audible "click" and
must be flush with the headlight assembly
⇒
f ig. 170
(1)
in the headlight assembly and secure it by turning it
clockwise (against the direction of the arrow).
Replace the headlight assembly.
(3)
(3)
with the light bulb
facing rearward.
holder.
(arrow (A)). The marking must no
longer be visible (arrow (B)).
Advertisement
Table of Contents
