Table of Contents
Advertisement
When the ignition is switched on and memory 1 or 2 is displayed, press the
the windshield wiper lever or the
between the 2 memories.
The memory accumulates and stores information about distance driven
and fuel used from the time the ignition was switched on until the time it
was switched off.
1
Single trip memory
If the ignition stays off for 2 hours or more, stored information is automat-
ically deleted. If the trip is continued within 2 hours after the ignition was
switched off, the new values are added.
Depending on the instrument cluster version, the memory displays and
stores the accumulated driving and fuel consumption data of any number
of single trips up to a total driving time of either 19 hours and 59 minutes
2
Total trip memory
99 hours and 59 minutes, and up to a total distance of either 1,999 km or
9,999 km. If one of the maximum values
is automatically cleared and starts again from 0.
Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under Settings > MFI data.
Displays that are not enabled will not appear.
Display
Function
Travel time
Driving time in hours (h) and minutes (min) corresponding to trip memo-
ries 1 and 2 (toggle).
Consumption
Current fuel consumption in miles per gallon (l/100 km) while driving.
--.- mpg
When units are set to miles, dashes appear instead of a number when
the engine is running and the vehicle is standing still.
Consumption
When units are set to kilometers, the display shows liters consumed per
--.- l/100 km
hour when the engine is running and the vehicle is standing still.
Av. consumption
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
--.- mpg
memories 1 and 2 (toggle) is displayed once the vehicle has been driven
about 330 feet (100 m). Until then, dashes appear instead of a number.
Av. consumption
The value displayed is updated every 5 seconds.
--.- l/100 km
Range
-- mi
Estimated distance in miles (km) that the vehicle can go with the fuel left
in the tank the way you are currently driving. Takes account of the cur-
Range
-- km
rent fuel consumption, among other things.
Route -- mi
Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Route -- km
Odometer
The odometer indicates the total distance driven by the vehicle.
Average speed
Average speed on trips per trip memories 1 and 2 (toggle). Displayed
-- mph
once the vehicle has been driven about 300 feet (100 m). Until then,
dashes may appear instead of a number. The value displayed is updated
Average speed
every 5 seconds.
-- km/h
-- mph
Digital display of the current vehicle speed.
-- km/h
Oil temperature
Current engine oil temperature (digital display).
2
May differ depending on the version of the instrument cluster.
button on the multi-function steering wheel to toggle
OK
button on
2
is exceeded, then the memory
Advertisement
Table of Contents
