Mfi Menu (Multi-Function Indicator); Possible Mfi Menu Displays - Volkswagen Eos Owner's Manual

Hide thumbs Also See for Eos:
Table of Contents

Advertisement

Menu
Function
Turn the Adaptive Front Lighting System (AFS) on and off
Assistants
(if applicable).
Current warning and information messages.
Vehicle
This menu item is only displayed when warning or infor-
status
mation messages are available. The number of available
messages is shown in the display. Example: 1/1 or 2/2.
Includes the Convenience and Lights & Vision submenus,
Settings
as well as many settings such as time, speed warning for
winter tires, language, and units.

MFI menu (Multi-Function Indicator)

Please first read and note the introductory information and heed the WARNINGS
The MFI display has 2 automatic memories: 1 – single trip memory and 2 – total trip memory. The
number of the trip memory is shown at the upper right of the display.
The trip memories are in addition to the trip odometer, which is displayed in the bottom part of the
instrument cluster and controlled using the
(4).
To display the distance driven on trips 1 and 2, select the Route item in the MFI menu. Press the
button ⇒ 
f ig. 15
to toggle between Route 1 and Route 2 (trip 1 and trip 2). Push and hold the
to manually reset a trip memory to zero.
The memory accumulates and stores information about distance driven
and fuel used from the time the ignition was switched on until the time it
was switched off.
1
Single trip memory
If the ignition stays off for 2 hours or more, stored information is auto-
matically deleted. If the trip is continued within 2 hours after the ignition
was switched off, the new values are added.
The memory displays and stores the accumulated driving and fuel con-
sumption data of any number of single trips up to a total driving time of
2
Total trip memory
99 hours and 59 minutes, and up to a total distance of 9,999 miles
(9,999 km). If one of the maximum values is exceeded, then the memory
is automatically cleared and starts again from 0.

Possible MFI menu displays

The following displays can be accessed in the MFI menu if enabled under Settings > MFI data.
Displays that are not enabled will not appear.
Display
Function
Travel time
Driving time in hours (h) and minutes (min) corresponding to trip memo-
ries 1 and 2 (toggle).
Consumption
Current fuel consumption in miles per gallon (l/100 km) while driving.
--.- mpg
When units are set to miles, dashes appear instead of a number when
the engine is running and the vehicle is standing still.
Consumption
When units are set to kilometers, the display shows liters consumed per
--.- l/100 km
hour when the engine is running and the vehicle is standing still.
button on the right of the instrument panel ⇒ 
See
f ig. 11
OK
button
OK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos 2014

Table of Contents