Table of Contents
Advertisement
2.1.1 Modifying a unit with a tuner board
If the unit has a tuner, the tuner antenna connection will need to be
changed to one of the unused BNC connectors that are on the back
panel.
If the unit does not have a tuner, skip to section 2.2.
Carefully remove the "N" style connector from the back panel and cut
the connector off. Strip back the insulation ½" and pull the braid back
from one side and twist together as shown below.
Crown Broadcast
2524 Toledo Road
Elkhart, IN 46516
U.S.A.
9
Phone: 574-262-8900
Fax: 574-970-8909
Service: 866-262-8917
service@irec1.com
Advertisement
Table of Contents
