Table of Contents
Advertisement
If problems occur, please consult an IT professional to help resolve
connection problems.
Once proper connection has been made to the unit, a log-in screen
should appear as shown below.
Enter the factory default log-in credentials:
User: admin
password: admin
This will allow connection to the unit with Administrator privileges.
This is necessary to allow for changes needed to the log-in credentials
explained later.
<<< NOTE: It is HIGHLY recommended to change the log-in credentials
for the Administrator level access as soon as possible to avoid the
possibility of unauthorized access to the unit. >>>
SAVE THIS PASSWORD – It is recommended to save your password in a
"Digital Password Vault" type system to aid in recovery in case it is
forgotten.
Crown Broadcast
2524 Toledo Road
Elkhart, IN 46516
U.S.A.
34
Phone: 574-262-8900
Fax: 574-970-8909
Service: 866-262-8917
service@irec1.com
Advertisement
Table of Contents
