Table of Contents
Advertisement
2.2.3 Mounting the board into the unit
The board hardware can now be mounted.
Remove the 4 screws that hold down the control/meter board. Or, if the
unit has the metering circuits as part of the motherboard, remove the 4
screws surrounding that area as shown below.
Crown Broadcast
2524 Toledo Road
Elkhart, IN 46516
U.S.A.
17
Phone: 574-262-8900
Fax: 574-970-8909
Service: 866-262-8917
service@irec1.com
Advertisement
Table of Contents
