Table of Contents
Advertisement
2.3.2 Installation of �lat ribbon cable – revision 2007
For motherboard revision 2007, install the other end of the �lat grey
ribbon cable to the now empty dual row header with pin 1 (red stripe)
on Z15 as shown below. NOTE: The �lat ribbon cable has more sockets
(20 pins) than the header has (16 pins). During installation, be sure pin
1 (red stripe) is on the correct end and is making proper connection.
Installing incorrectly will result in improper readings and control.
Crown Broadcast
2524 Toledo Road
Elkhart, IN 46516
U.S.A.
23
Phone: 574-262-8900
Fax: 574-970-8909
Service: 866-262-8917
service@irec1.com
Advertisement
Table of Contents
