Liabilities; Manufacturer's Liability - REMEHA RemaSol200SE-2S Installation And Service Manual

Solar hot water calorifer
Table of Contents

Advertisement

200SE-2S - 300SE-2S
1.3

Liabilities

26/04/2016 - 7607575-05
The instructions and warnings affixed to the appliance
must never be removed or covered and must remain
legible during the entire lifespan of the appliance.
Immediately replace damaged or illegible instructions and
warning stickers.
WARNING
Never cut the power to the solar control system,
even during extended absences. The control
system protects the installation against
overheating in summer when it is running.
WARNING
Do not modify the control system parameters
unless fully conversant with them.
During extended absences, we recommend lowering the
set point temperature in the solar DHW calorifier to 45°C.
When the user is present, the set point must be set to
60°C.
1.3.1.

Manufacturer's liability

Our products are manufactured in compliance with the
requirements of the various applicable European
Directives. They are therefore delivered with [ marking
and all relevant documentation.
In the interest of customers, we are continuously
endeavouring to make improvements in product quality.
All the specifications stated in this document are therefore
subject to change without notice.
Our liability as the manufacturer may not be invoked in the
following cases:
4 Failure to abide by the instructions on using the
appliance.
4 Faulty or insufficient maintenance of the appliance.
4 Failure to abide by the instructions on installing the
appliance.
1. Safety instructions
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Remasol300se-2s

Table of Contents