Dimplex VF5452L Owner's Manual page 9

Opti-V Installation
!
NOTE: Cap any additional
wires from the power supply not
used in the installation.
9. Ensure that the green ground-
ing wire is securely attached
to the back plate.
CAUTION: Ensure the
wire connectors are securely
tightened, so no bare wires (live
or neutral) are exposed.
10. Ensure the grounding wire of
the supply cable is securely
attached to the grounding
screw.
!
NOTE: The wire connections
on the Opti-V feed into a 3-prong
plug just below the electrical cav-
ity opening, before closing the
electrical cover ensure that the
plug is fully installed.
11. Reinstall the electrical cover
panel.
12. Reinstall the protector sheet
to prevent dust from entering
the unit while inishing the
surround.
13. Finish surrounding wall.
There are 3 different options
for inishing the wall:
• Permanent - install drywall
right up to the lange that sur-
rounds the opening.
• Semi Permanent - inish
around edge using lashing
material (not included)
• Flexible - create opening big
enough to access mounting
langes and a false front that
can be removed.
9