Page 1
For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage. To view the full line of Dimplex products, please visit www.dimplex.com 7213460100R02...
CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment. W ARNING: Procedures and techniques which, if not carefully followed, will expose the user to the risk of fire, serious injury, or death. www.dimplex.com...
Welcome & Congratulations Thank you and congratulations for choosing to purchase an electric fireplace from Dimplex, the world leader in electric fireplaces. Please carefully read and save these instructions. CAUTION: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty.
Servicing is apparatus. required when the apparatus has 11. Do not defeat the safety pur- been damaged in any way, such as pose of the polarized or grounding- power-supply cord or plug is dam- type plug. A polarized plug has www.dimplex.com...
NOTE: Please read all instruc- viewers enjoyment is important. It tions before installing. is recommended that the follow- 1. For rough in framing, the ing guidelines be used for locating opening should follow the the unit. www.dimplex.com...
Page 7
120-240VAC. constructed to support: VF2927L - 63 lbs (29 kg) NOTE: Use minimum 14 AWG VF5452L - 116 lbs (52 kg) supply cable with two insulated copper conductors (white and 2. Allow up to 4 ft. (121.9 cm) black) and one bare ground wire.
Page 8
5. Place the unit in the framed (included). opening, level with shims if 9. Ensure that the green ground- necessary and attach unit to ing wire is securely attached Figure 2 Figure 3 Cable Clamp Hole Grounding Screw Cable Plate Electrical Mounting Cover Panel Flanges www.dimplex.com...
Page 9
Fireplace Installation to the back plate. 13. Finish surrounding wall. There are 3 different options CAUTION: Ensure the for finishing the wall: wire connectors are securely tightened, so no bare wires (live • Permanent - install drywall or neutral) are exposed. right up to the flange that sur- rounds the opening.
The screen brightness can be ad- top left hand side of the appliance justed using the (Figure 2E) above the glass. (Figure 2) buttons. The but- (Figure 2F) The mains (power) switch (Figure ton darkens the screen and the www.dimplex.com...
Operation Figure 3 button brightens the screen. Volume ! NOTE: On the VF5452L there Battery Controls Cover are brightness controls for each LED screen. The brightness controls for the right screen are located in the center of the unit. Remote Control Operation...
Fireplace Surface Cleaning To remove fingerprints or other marks, the exterior finish can be cleaned with a damp cloth with a mild detergent. The surface should be completely dried with a lint free cloth to prevent water spots. www.dimplex.com...
Limited warranty service requires a proof how long of purchase of the product. Products, other than fireplace surrounds What Dimplex will do in the event of a (mantels) and trims, covered by this defect limited warranty have been tested and...
Page 14
Warranty • Dimplex will in its sole discretion either or trims or any part thereof (or any repair or replace such defective prod- replacement product or part) including, uct or part without charge. If Dimplex without limitation, all shipping costs...