JTECH CommPass Manual page 11

4. Unplug the battery from the Pager.
5. Dispose of the Nickel Metal Hydride battery pack at
any retail department or home improvement stores
that recycles rechargeable batteries.
6. Plug the new battery pack into the Pager.
7. Move any excess wire to the into the
compartment's left side while inserting
the battery into the Pager.
8. Battery wires must be on the left side of
the Pager and not under the battery to
assemble the pager properly.
9. Replace the Insert and "snap" the Clear
Plastic Cover back into place.
10. Insert the Pager into the Charger and fully
charge the battery.
11