Chapter 5
5-12
CLI (Command Line Interface)
[6] Restart System
Function
Procedure
[7] Exit
Function
Procedure
When you execute the system restart command the system will restart provided
that the value of Upgrade Status on the 4) Display Package Information menu
is 'SUCCESS'. If the value is 'Fail' or 'Loading', the system will not restart and a
warning message will appear. This is because the system will not operate properly
when the restart command is given when the system update has not been properly
completed.
1. In the <System Configuration Menu> screen, type '6', and press [Enter].
Restart System? (y: Yes, n: No)
2. To restart the system, type 'y', and press [Enter].
This closes the <System Configuration Menu> screen and returns to the main
menu screen.
In the <System Configuration Menu> screen, type '7' and press [Enter].