Mmc Port Block/Unblock - Samsung SMG-400 User Manual

Chapter 5
5-36
CLI (Command Line Interface)

[12] MMC Port Block/UnBlock

Function
Procedure
You can set Block/UnBlock on each port of the system. 'Block' indicates
'disabled to use' and 'UnBlock' indicates 'enabled to use'.
1. In the <PSTN Configuration Menu> screen, type '12', and press [Enter].
< < < < < MMC Port Block/UnBlock >>> > >
+----+--------------+---------------+-------------+
| Port | Card Type
| No. | VoIP
+----+--------------+---------------+-------------+
| 0 |
| 1 |
| 2 |
| 3 |
+----+------------
2. Type '1' to block or '2' to unblock, and press [Enter].
Select Block or UnBlock (1: Block, 2: UnBlock) ->
3. Input the slot number for the port specified to be unblocked, and press [Enter].
Blocking Slot Number: (0: VoIP, 1: SLI, 2: LOOP)
4. Input the port number, and press [Enter].
Blocking Port No. of VoIP Slot (Range: 0 ~ 0x1F) [ . :Exit ] ->
5. You can continue with other ports by typing in the corresponding port number
and pressing [Enter].
Blocking Port No. of VoIP Slot (Range: 0 ~ 0x1F) [ . :Exit ] ->
6. To exit, type '.', and press [Enter]. You will return to the <PSTN Configuration
Menu> screen.
( 0:UnBlock,
| SLI
0 |
0 |
0 |
0 |
-+---------------+-------------+
-
1:Block, -:UnUsed )
| LOOP
0 | 0
0 | 0
0 | 0
0 | 0
|
|
|
|
|
|
[ . :Exit ]