System Cabinet; Processor Cards; Embedded Applications - Samsung OFFICESERV 7100 Description

PART 2. HARDWARE DESCRIPTIONS

2.1 SYSTEM CABINET

The OfficeServ 7100 cabinet has three slots to mount boards, an AC to DC power supply, cooling fan, a battery
backup connector, and power on/off switch. The cabinet is designed to be rack mounted in a 19 inch rack, wall-
mounted with a wall-mounted bracket, or placed on a table top. Slot 0 is exclusively used for the MP10a proces-
sor card, while slots 1 and 2 are 64 channel universal slots that the UNI cards or other OfficeServ 7200/OfficeServ
7400 station/trunk cards can be installed in.

2.2 PROCESSOR CARDS

MP10a (MAIN PROCESSOR CARD)
This is the main processor controlling system operation. The MP10a always goes in slot 0 of the cabinet. The
MP10a provides a LAN connection, a MISC port (external page, MOH/BGM, loud/common bell), an SIO port
(Samsung Maintenance Only), four universal ports for either digital phones or power of Ethernet ports (dependant
on the type of daughterboard module plugged in), a internal modem slot, and a media card (SD) slot which can
accommodate a SD card containing the system software and storage space (52 hours) of voicemail messages and
prompts. The MP10a also includes embedded Automated Attendant, Voicemail, and MGI channels (license key
required). The MP10a card cannot migrate to the OfficeServ 7200 or OfficeServ 7400 systems.
The MP10a has a connector for mounting either a 4DLM card or a 4SWM card.When the 4DLM card is installed on
the processor it will provide an interface for 4 Digital telephone sets. When the 4SWM card is installed on the
processor it will provide an interface for 4 power over ethernet (POE) ports. The MP10a also has a connector for
mounting the optional modem board. This modem board can be used for remote access to system administra-
tion at installation that do not have a LAN or WAN connection. This is the same modem card used in the other
OfficeServ systems. If the 4SWM is installed the switch and LAN is automatically connected by way of the back-
plane. In addition it may be used as a backup for LAN connectivity.

2.2.1 EMBEDDED APPLICATIONS

VOICEMAIL/AUTO ATTENDANT
The MP10a processor has the voicemail and automated attendant application embedded onto the card. The
VMAA is designed to meet the demands of the sophisticated voice mail user without sacrificing simplicity. The
Automated Attendant is available with four ports for processing voicemail/AA traffic routed to the Automated
Attendant.The same four ports can be enabled to perform both the voicemail and automated attendant function
of answering calls and storing messages into mailboxes for each extension.
MEDIA GATEWAY INTERFACE
Eight (8) MGI channels are embedded on the MP10a processor, and can be enabled (licensed in 4 port incre-
ments) to support VoIP functions such as IP phones, IP networking, and IP trunking.The embedded MGI channels
can be enabled to support the following capabilities:
• IP Phones
• IP Networking (Network multiple systems over an SPNet IP Network)*
• G.729 CODEC, G.723.1, G.711, G.729A CODECs
• IP Trunking (SIP/H.323)
• T.38 Fax CODEC
• Inband or Out-of-band signaling of DTMF tones
*The OfficeServ 7100 can network using QSig over PRI or SP-Net over IP to other Samsung OfficeServ systems.
2.1
Home Page Table of Contents