Things You Should Know; Recall / Hookflash Key; System Access Codes - Samsung DCS User Manual

Hide thumbs Also See for DCS:

Table of Contents

DCS Gateway

Things You Should Know

• Lines from the Telephone Company are "C.O. lines." Calls

on these lines are referred to as "outside calls."

• Lines may be assigned to groups. When they are in a group,

you access a line by dialling a group access code. For ex-

ample, dial 9 to get a local outside line.

• DCS provides distinctive ring patterns to your SLT:

−

Outside calls have a double ring tone repeated.

−

Internal calls have a single ring tone repeated.

A variety of single line telephones (SLTs) are available for

connection to your Gateway system. Most SLTs have a key

marked 'Recall'; others have a similar key marked 'R' or

'Hookflash'. Please note that where an instruction in this guide

requires you to press the Recall key, you should press the

equivalent R or Hookflash key if appropriate.

Your system is configured with default system access codes for

using the various features described in this guide. These codes

are also printed on the back cover for quick reference. How-

ever, your system may have been set up to use a different set of

codes. Therefore, if your system does not work as described in

this guide, refer to your System Administrator for advice.

A special table has been provided at the back of this guide for

you to enter the codes required by your system, if different

from the default codes.

— 1 —

SLT User Guide

Table of Contents