Starting Smg-400; Turning On - Samsung SMG-400 User Manual

Starting SMG-400

This section describes the login procedure using CLI, after turning on SMG-400.

Turning on

While the hyper terminal window is on the screen, turn on the SMG-400 with the power button in
the rear of the system.
After the system turn on, system initialization proceeds approximately 60 seconds. The system
POST (Power On Self Test) will be executed and the factory-preset configuration data will be
loaded and shown on the terminal.
If booting of the SMG-400 is successfully completed, then
☞L3 LED and PWR LED are on in green.
☞L2 LED and OPER LED blink in green.
SLC LOOP
P1 P2 P3 P4 P1 P2 P3 P4
SIO
ON(I)
OFF(O)
110-240VAC
I(ON)
1.4A 50/60Hz
LAN
O(OFF)
4-3