Pstn Configuration Menu - Samsung SMG-400 User Manual

PSTN Configuration Menu

In the PSTN Configuration Menu, you can set the PSTN interface that is required to connect to
the PSTN trunk line. You can also view the values of parameters.
At the SMG-400 prompt of the main screen, type 'pstnmenu' and press [Enter]. The following
PSTN Configuration Menu screen will be displayed.
<<<<< PSTN Configuration Menu >>>>>
[0] Gateway Operation Mode
[1] PSTN Rerouting Insert Digit
[2] PCM Method
[3] Dial Method
[4] SLI Signal
[5] Trunk Signal
[6] Call Control Method
[7] Ring Cadence
[8] System Tone Cadence
[9] CO Tone Cadence
[10] Gain Control
[11] Diagnosis
[12] MMC Port Block/UnBlock
[13] Display Card Configuration
[14] Display Port Status
[15] Save & Exit
[16] Exit
Select ?
5-13