Chapter 5
5-40
CLI (Command Line Interface)
VoIP Configuration Menu
In the VoIP Configuration Menu, you can control the IP interface that connects to the SMG-400.
You can also set IP routing information together with VoIP features.
At the prompt on the startup screen, type 'voipmenu' and press [Enter]. The following screen will
be displayed.
<<<<< VoIP Configuration Menu >>>>>
[0] VoIP General Option
[1] VoIP DSP Option
[2] VoIP Gatekeeper Option
[3] VoIP Routing Table
[4] VoIP Caller ID Table
[5] VoIP Remote IP Table
[6] VoIP Remote IP Status
[7] Save & Exit
[8] Exit
Select ?
The following is an overview of the 8 submenus found in the VoIP Configuration Menu.
No
0
VoIP General Option
1
VoIP DSP Option
2
VoIP Gatekeeper Option
3
VoIP Routing Table
4
VoIP Caller IP Table
5
VoIP Remote IP Table
6
VoIP Remote IP Status
7
Save & Exit
8
Exit
Menu
Sets general options for VoIP services.
Sets DSP (Digital Signal Processing) options for VoIP
services.
Sets connection options for Gatekeeper.
Sets types of connection for VoIP sending and incoming
call services.
Sets the Caller ID for external calling through IP Network
Sets IP address of VoIP IP Table.
Checks each IP status in VoIP IP Table.
Closes the VoIP Configuration Menu screen with saving
changes.
Closes the VoIP Configuration Menu screen without saving
changes.
Functions