Samsung SMG-400 User Manual page 151

Onhotconnection
Function
Procedure 1. At the SMG-400 prompt, type 'Onhotconnection,' and press [Enter].
If a Hook Off Event is detected in the FXS/FXO configuration, it automatically
enables a VoIP call. The routing information about access code '9' must be set
from the VoIP Outbound Routing Table.
This function can be used when a 1:1 connection is made to the other's Gateway,
and the VoIP Network is used to do Overlap Dialing. (In case VoIP is used for T/D)
This CLI sets the currently active status, and if the setting needs to be maintained
during system booting, it must be saved in the CLI's pstnmenu.
SMG400:165.213.81.230> Onhotconnection
On hot connection...
value = 23 = 0x17
SMG400:165.213.81.230>
5-89