Samsung SMG-400 User Manual page 128

Chapter 5
5-66
CLI (Command Line Interface)
CDRtcpport port
Function
Default
Procedure At the SMG-400 prompt, type 'CDRtcpport' and a space, and type the TCP port
Set the TCP port for the TCP Link that will display the CDR output information.
It is already set as the Default(Default: 8200 port) value, and the user can use the
CLI command to change the setting.
[CDR] TCP Port 8200
for displaying the CDR information, and then press [Enter].
For example, if you want to set the TCP port for displaying the CDR information
as 8500, type 'CDRtcpport 8500' on the screen, and press [Enter], and then the
port will be set as follows:
SMG400:165.213.81.230> CDRtcpport 8500
>>>[CDR] Set CDR Output on TCP Port(8500)
Goodvalue = 0 = 0x0
SMG400:165.213.81.230>