Samsung SMG-400 User Manual page 138

Chapter 5
5-76
CLI (Command Line Interface)
putdb "filename"
Function
Procedure At the SMG-400 prompt, type 'putdb' and a space, and type the file name of the
It saves the DB file transmitted via the FTP program in the system. First, use the
FTP program to send the saved DB file to the system, and use this command to set
the DB for the system.
DB to save in the system, and press [Enter]. Then, the system DB is saved as the
applicable DB value. The file name must be in quotation marks ("").
For example, if you want to use the backup DB named db.txt in the system, use
the FTP program to send the DB file to the system, and type 'putdb "db.txt"' at the
prompt, and press [Enter].
SMG400:165.213.81.230> ls
<- Check the system information file.
DB.TXT
value = 0 = 0x0
SMG400:165.213.81.230> putdb "db.txt"
<- Upload the system information saved in db.txt file
to the system.
Good
Goodvalue = 0 = 0x0
SMG400:165.213.81.230>