Priority - D-Link DSL-2888A User Manual

Section 4 - Configuration
From this page you may configure your Internet failover priority. In the event that your
primary Internet connection method fails, this device can automatically fall back to using a
secondary or tertiary connection in order to maintain Internet connectivity.
Internet Fail Over
Select the primary Internet connection to use. The options are PTM_/
Primary Internet
Connection: ATM_, which is the xDSL connection; Eth_0 and Eth1-Eth5 if enabled,
which are the Ethernet WAN interfaces provided by Residential
Gateway mode; and USB0, which is a USB connected modem.
Secondary Select the secondary backup, Internet connection to use in the event
Internet the primary Internet connection fails.
Connection:
Tertitary Select the third backup, Internet connection to use in the event the
Backup Internet
primary and secondary Internet connection fails.
Connection:
Click Save when you are done.
D-Link DSL-2888A User Manual

Priority

DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings >> Internet >> Priority
Internet Fail Over
Home Settings Features
Priority
Configure your Internet fail over priority. In the event that your primary Internet connection method fails, this
device can automatically fall back to using a secondary or tertiary connection in order to maintain Internet
connectivity. From this page you may configure your Internet failover priority.
DSL Profile Internet
⌵
Primary Internet Connection PTM0
⌵
Secondary Internet Connection Eth0
⌵
Tertitary Backup Internet Connection Not Available
COPYRIGHT © 2016 D-Link
Management
Save
40