Settings; Wizard; Internet - D-Link DSL-2888A User Manual

Section 4 - Configuration
In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start
the router for the first time. Refer to Setup Wizard on page 14 for more information.
The following pages will describe how to manually configure how your DSL-2888A connects
to the Internet. The DSL-2888A supports multiple WAN connection types and WAN failover.
We recommend setting up Internet WAN connections one at a time, Save the configuration,
and confirm the connection works before returning to this section to add additional WAN
connections.
The following configuration pages are divided by WAN Access Type.
WAN Access Type: Select WAN interface to configure. The options are ADSL, VDSL,
Ethernet, or USB.
Select a WAN interface and refer to its configuration page for setup information.
For ADSL, refer to ADSL on page 28.
For VDSL, refer to VDSL on page 29.
For Ethernet, refer to Ethernet on page 30.
For USB, refer to USB on page 31.
D-Link DSL-2888A User Manual

Settings

Wizard

Internet

Home Settings
DSL-2888A HW:V1.0.0 FW:V1.1.43
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
Settings >> Internet
WAN Access Type: ADSL
Interface: ATM 0
Enable Interface: Enabled
ISP SETTINGS
VPI:
VCI:
VLAN Tagged: Enabled
VLAN ID:
VLAN Priority: Disable
Encapsulation: VC MUX
ATM QoS: Non Realtime VBR
Sustainable Cell Rate: undefined
Maximum Burst Size: undefined
Minimum Cell Rate: undefined
Features Management
Save
DSL Profile Priority
⌵
⌵
⌵
Advanced Settings ...
⌵
⌵
27