Vdsl - D-Link DSL-2888A User Manual

Section 4 - Configuration
VDSL is one of the latest and fastest home broadband technologies. VDSL uses the DSL port
on your DSL-2888A to connect to the Internet. In order for your DSL-2888A to use VDSL, you
must configure the VDSL Settings, your ISP Settings, and your IPv4/IPv6 Settings.
WAN Access Type: Select VDSL to configure ADSL connection settings.
Interface: Select the interface from the drop-down menu. PTM0-PTM7 are
available. The default is PTM0.
Enable Interface: Select whether to enable or disable this interface.
ISP Settings
VLAN Tagged: Enable or disable VLAN tagging.
If you enabled VLAN Tagged, the following options are available:
VLAN ID: Enter the VLAN ID. The value should be 0, or 0-4079.
VLAN Priority:
Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
Proceed to IPv4 Settings on page 32 or IPv6 Settings on page 36.
D-Link DSL-2888A User Manual

VDSL

DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings >> Internet
ISP SETTINGS
Home Settings Features
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
DSL Profile Priority
⌵
WAN Access Type: VDSL
⌵
Interface: PTM 0
Enabled
Enable Interface:
VLAN Tagged: Enabled
VLAN ID:
⌵
VLAN Priority: Disable
Management
Save
29