Connect A Wireless Client To Your Router; Wps Button - D-Link DSL-2888A User Manual

Section 5 - Connecting to a Wireless Network

Connect a Wireless Client to your Router

WPS Button

The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters,
media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to
connect to the DSL-2888A router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how
to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DSL-2888A for about 1 second. The WPS LED on the front will start to blink.
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected and your wireless
connection will be encrypted with WPA2.
D-Link DSL-2888A User Manual 65