Virtual Server - D-Link DSL-2888A User Manual

Section 4 - Configuration
In some cases you may have two applications running on different devices which require
the same public port. Virtual server allows you to remap a different external port to each
device. To configure the virtual server, click Virtual Server.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the Add Rules button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Create New User
Name: Enter a name for the rule. Alternatively, select the protocol/Application
from the drop-down menu.
Local IP: Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Protocol: Select the protocol of the traffic to allow or deny (TCP, UDP, Both,
or Other).
Protocol Number: If you entered Other above, enter the protocol number.
External Port:
Enter the public port you want to open.
Internal Port:
Enter the private port you want to open.
Schedule:
Select the interface to apply the rule to from the drop-down menu.
Click Save when you are done.
D-Link DSL-2888A User Manual

Virtual Server

Home Settings
DSL-2888A HW:V1.0.0 FW:V1.1.43
Virtual Server
Your router helps share a single IP address assigned by your Internet service provider among several clients
in your home. Virtual servers are preset port mappings for popular services, like a web or e-mail server, that
route traffic to a specified client inside.
Features >> Virtual Server
Status Name Local IP Protocol External Port
Add Rule Remaining: 15
COPYRIGHT © 2016 D-Link
Create New Rule
Name:
Local IP:
⌵
Protocol: TCP
External Port:
Internal Port:
⌵
Interface: PTM0
Apply
Features Management
Port Forwarding Save
Internal Port Interface Edit Delete
⌵
<< Application Name
⌵
<< Computer Name
51