D-Link DSL-2888A User Manual page 49

Section 4 - Configuration
DHCP Lease Time: Enter the length of time for the IP address lease in minutes.
Advanced Settings
IPv4 Multicast Enable to allow IPv4 multicast traffic to pass through the router from
Stream: the Internet.
IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from
Stream: the Internet.
IPv6 Settings
WAN Interface:
Select the WAN interface to configure the local network IPv6 settings.
My Internet
Your Internet connection's IPv6 connection type is displayed here.
Connection is:
D-Link DSL-2888A User Manual
Network (continued)
Home Settings
DSL-2888A HW:V1.0.0 FW:V1.1.43
Network
Use this section to configure the network settings for your device. You can enter a name for your device in
the management link field, and use the link to access web UI in a web browser. Recommend to change the
management link if there are more than one D-Link devices within the network.
Settings >> Network
Network Settings
LAN IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Local Domain Name: localhost
Enable DNS Relay: Enabled
DHCP Server
Enabled
Status:
DHCP IP Address Range: 192.168.1. 100 to 192.168.1.
DHCP Lease Time: 86400 minutes
Advanced Settings
IPv4 Multicast Streams: Enabled
IPv6 Multicast Streams Enabled
IPv6 Settings
WAN Interface: Eth0
My Internet Connection is: Auto Configuration (SLAAC/DHCPv6)
LAN IPv6 ADDRESS SETTINGS
Enable DHCP-PD: Enabled
LAN IPv6 Link-Local Address: fe80::1
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment: Enabled
Autoconfiguration Type: Stateful DHCPv6
IPv6 Advertisement Lifetime: minutes
COPYRIGHT © 2016 D-Link
Features Management
Save
Advanced Settings ...
254
⌵
Advanced Settings ...
⌵
45