Pc Connection; Camera Login; Default Ip Address - visual engineering PAL/NTSC H.264 Encoder User Manual

Visual Engineering
Video solutions. Integrated
PAL/NTSC H.264 Encoder December 2016

PC Connection

Now that the encoder is powered and has an IP connection to a PC, users can web browse to view
the video and control its functions.
Video from the connected camera can be viewed on a web browser. The web browser also allows
control of encoder's parameters such as resolution, bit-rate, and network settings.
All parameters are non-volatile, meaning they will be remembered after re-powering the module.
It should be noted that Internet Explorer users should ensure VLC is loaded onto their machine,
without this the video viewing pages of the web browser will not work.
Users can web browse to the encoder using any of the standard web browsers; Firefox, Internet
Explorer or Chrome - note that Chrome may require some additional settings to view video.
Simply type the encoder's IP address into the browser address bar, using the encoder default IP
address of 192.168.1.195

Camera Login

On trying to establish a connection the user will be prompted for the User Name and Password,
enter the following details:
Default User Name is:
root
Default Password is:
1234

Default IP Address

Encoders are, by default, set with a fixed IP address of 192.168.1.195, this is detailed on the
encoder's part number label.
If the encoder is not responding on this address it is possible that the IP address has been changed.
If the new IP address is unknown, the user can use the VE Camera Viewer software application to
locate the IP address. This method is explained in the The VE Camera Viewer section of this user
guide.
visualengineering.co.uk Page 12