Bosch GLM 50 C Professional Original Instructions Manual page 31

Laser
Hide thumbs Also See for GLM 50 C Professional:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
OBJ_BUCH-2450-005.book Page 31 Thursday, August 25, 2016 8:38 AM
A) For measurements from the rear measuring tool edge, weak backlighting and 25 °C operating
temperature are applicable for high reflectivity of the target (e.g. a white-painted wall). In addition,
a deviation influence of ± 0.05 mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, applies to high reflectivity of the target
(e.g. white cardboard), strong backlighting and – 10 °C to +45 °C operating temperature. In addi-
tion, a deviation influence of ±0.15 mm/m must be taken into account.
C) After calibration at 0 ° and 90 ° with an additional grade error of ±0.01 °/degree to 45 ° (max.).
D) At 25 °C operating temperature
E) In the continuous measurement function, the maximum operating temperature is +40 °C.
F) except battery compartment
G) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
H) Bluetooth® deactivated
I) The left-hand side of the measuring tool serves as the reference level for grade measurement.
The measuring tool can be clearly identified with the serial number 11 on the type plate.
Declaration of Conformity
We declare under our sole responsibility that the product described under "Technical
Data" complies with all applicable provisions of the directives 1999/5/EC and
2011/65/EU including their amendments and is in conformity with the following
standards: EN 61010-1: 2010-10, EN 60825-1: 2014-08,
EN 300 328 V1.8.1: 2012-06, EN 301 489-1 V1.8.1: 2008-04,
EN 301 489-1 V1.9.2: 2011-09, EN 301 489-17 V2.2.1: 2012-09,
EN 62479: 2010-09, EN 50581: 2012.
Technical documents at:
Robert Bosch Power Tools GmbH, PT/ECS,
70538 Stuttgart, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Bosch Power Tools
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
English | 31
1 609 92A 23J | (25.8.16)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents