Switching The Door Unlock Function - Toyota Land Cruiser Prado Owner's Manual

■

Switching the door unlock function

It is possible to set which doors the entry function unlocks.
Turn the "ENGINE START STOP" switch OFF.
STEP 1
STEP 2 When the indicator on the key surface is turned off, press and hold
or
ing
The setting changes each time an operation is preformed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat
Multi-information
display
STEP 3 Vehicles with alarm system: Unlock the doors using the wireless
remote control and open one of the doors.
If a door is not opened within 30 seconds after
the doors will be locked again and the alarm will automatically be
set. In case that the alarm is triggered, immediately stop the alarm.
(→P. 118)
(if equipped) for approximately 5 seconds while press-
on the key.
.)
STEP 2
Unlocking function
Hold the driver's door han-
dle to unlock only the
driver's door.
Hold the front passenger's
door handle to unlock all
doors.
Hold either door handle to
unlock all doors.
1-2. Opening, closing and locking the doors
Beep
Exterior: Beeps three
times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
1
is pressed,
39