Panasonic WH-ADC0309H3E Service Manual page 80


On the wall near the Tank Unit, attach the
adaptor by screwing screws through the holes
in the back cover.

Pull the CN-CNT cable through the hole in the
bottom of the adaptor and re-attach the front
cover to the back cover.
Screws
CN-CNT cable
(Take care not to
pinch the cable)
80

Use the included cord clamp to fix the CN-CNT
cable to the wall.
Pull the cable around as shown in the diagram so
that external forces cannot act on the connector in
the adaptor.
Furthermore, on the Tank Unit end, use the
included cable tie to fix the cables together.
Cord clamp
Cable tie