Table of Contents
Advertisement
The condensate trap bottom part should be fi lled with 50 cc. of water before
operating the boiler.
1.
When the boiler is mounted push the plastic hose supplied all the way onto the
condensate outlet to the bottom left hand corner of the boiler as shown in the diagram.
2.
Cut the plastic hose to desired length and fi t a plastic coupling to connect to your
plastic waste pipe.
NOTE: Removal of the condensate trap for cleaning purposes.
1.
Pull off the plastic hose from the condensate trap.
2.
Unscrew the bottom of the trap in an anti-clockwise direction by hand.
* The accessory for the condensate trap includes the hose.
Installation of the Condensate Waste Hose
IMPORTANT
Advertisement
Table of Contents
