Subframe - Honda CR250R 2004 Owner's Manual

SUBFRAME

Subframe Removal
1. Remove the seat (page 17).
2. Remove the side cover by removing the bolts,
collars.
1
3
(1) SEAT (3) SIDE COVER
(2) BOLTS
3. Loosen the screw on the air filter connecting tube
clamp.
4. Remove the three rear subframe mounting bolts.
(1) SUBFRAME MOUNTING BOLTS
5. Remove the rear subframe by pulling it straight
backward.
Subframe Installation
1. Loosely attach the upper and lower ends of the
subframe to the mainframe while connecting the
expansion chamber to the muffler with the sealing
rubber and air filter connecting tube to the
carburetor.
2. Tighten the screw on the connecting tube clamp.
2
(1) SEALING RUBBER
(2) CONNECTING TUBE CLAMP
3. Align the subframe with the rear wheel and tighten
the three subframe mounting bolts.
TORQUE:
Upper: 22 lbf•ft (30 N•m, 3.1 kgf•m)
Lower: 22 lbf•ft (30 N•m, 3.1 kgf•m)
1
(1) SUB FRAME MOUNTING BOLTS
1
2
1
4. Install the side covers, side cover bolts and collars.
5. Install the seat (page 17).
3
1
(1) SIDE COVER
(2) SIDE COVER BOLTS/COLLARS
(3) SEAT
2
19