Subframe - Honda CRF250R Owner's Manual

Subframe

Subframe

Refer to Important Safety Precautions on page 23.
Removal
1. Remove the seat (page 34).
2. Remove the right and left mufflers (page 121).
3. Remove the rear fender mounting bolts, nuts
(1) and rear fender (2) backward.
(1)
(1) rear fender mounting bolts and nuts
(2) rear fender
4. Remove the air cleaner case (3) from the
bosses (4) of the subframe.
(4)
(3)
(3) air cleaner case (4) subframe bosses
38
Servicing Your Honda
5. Remove the air cleaner mounting bolts (5) and
unhook the fuel tank band (6).
(5) air cleaner mounting bolts
(6) fuel tank band
6. Remove the subframe lower bolts (7) and
(2)
subframe upper bolts (8).
Remove the subframe (9).
Left side:
(8)
(7)
(3)
(7) subframe lower bolts
(8) subframe upper bolts
(9) subframe
(6)
(5)
Right side:
(9) (9)
(8)
(7)
Installation
1. Loosely attach the upper and lower ends of the
subframe to the main frame and loosely install
all subframe bolts.
2. Tighten the subframe upper bolts (1) and
subframe lower bolts (2) to the specified
torque:
subframe upper bolts:
24 lbf·ft (32 N·m, 3.3 kgf·m)
subframe lower bolts:
36 lbf·ft (49 N·m, 5.0 kgf·m)
Left side: Right side:
(1)
(2)
(1) subframe upper bolts
(2) subframe lower bolts
(1)
(2)