Throttle Grip - Honda CR250R 2004 Owner's Manual

1. OPERATING INSTRUCTIONS
3. Major adjustments can be made at the integral
cable adjuster.
Loosen the lock nut and turn the adjuster. Turning
the adjuster in direction C will increase free play and
turning it in direction D will decrease free play.
Tighten the lock nut after adjusting.
4. Test ride to be sure the clutch operates properly
without slipping or dragging.
NOTE:
•
If proper adjustment still cannot be obtained or the
clutch does not operate correctly, see pages 23 —
24, refer to the Honda Service Manual, or see your
authorized Honda dealer for clutch disassembly
and wear inspection.
1
(1) LOCK NUT (2) INTEGRAL CABLE ADJUSTER
(C) INCREASE (D) DECREASE
6

Throttle Grip

Standard throttle grip free play is approximately
1/8 — 3/16 in (3 — 5 mm) of grip rotation.
1. Minor adjustment is made with the upper adjuster.
Remove the dust cover and loosen the lock nut.
Turning the adjuster in direction A will increase free
play and turning it in direction B will decrease free
play. Tighten the lock nut and reinstall the dust
cover after adjustment.
If the adjuster is threaded out near its limit or the
correct free play cannot be reached, turn the
adjuster all the way in and back out one turn.
Tighten the lock nut, install the dust cover and make
the adjustment with the carburetor top adjuster.
2
1
D
C
(1) DUST COVER
(3) UPPER ADJUSTER (A) DECREASE (B) INCREASE
2
B
3
A A
(2) LOCK NUT
2. To make major adjustments, loosen the lock nut.
Turn the adjuster in direction C to increase free play,
and in direction D to decrease free play.
Tighten the lock nut.
3. Operate the throttle grip to ensure that it functions
smoothly and returns completely.
C
D
3
(1) DUST COVER (2) LOCK NUT
(3) ADJUSTER (C) INCREASE
(D) DECREASE
1
2