Honda CR250R 2004 Owner's Manual page 65

6. SUSPENSION ADJUSTMENT
Install the handlebar, rubber mounts, washers and
handlebar holder nuts and tighten the handlebar holder
nuts.
TORQUE: 33 lbf ft (44 N m, 4.5 kgf
• •
(1) HANDLEBAR (2) RUBBER MOUNTS
(3) WASHERS/HANDLEBAR HOLDER NUTS
Install the number plate and number plate bolt.
(1) NUMBER PLATE
(2) NUMBER PLATE BOLT
62
With the front brake applied, pump the fork up and
down several times to seat the axle and check front
brake operation.
m)
•
Tighten the left fork pinch bolts alternately first.
While keeping the forks parallel, alternately tighten the
right fork pinch bolts.
TORQUE: 14 lbf
(1) AXLE PINCH BOLTS
CAUTION:
•
When torquing the axle pinch bolts, be sure the
axle is seated firmly onto the left fork leg clamp
inner surface.
ft (20 N m, 2.0 kgf m)
• • •
Clean the threads of the disc cover bolts and axle holder
thoroughly.
Apply locking agent to the bolt threads.
Install the disc cover and tighten the bolts.
TORQUE: 9 lbf ft (13 N m, 1.3 kgf
• •
(1) BOLTS (2) DISC COVER
Turn the rebound damping adjuster screws back to
their original settings.
m)
•