Design Information; Notes On Standards; General Standards For Heating Systems; Standards For Structural And Safety Devices - Froling S1 Turbo Installation Instructions Manual

Safety

Design Information

2.4 Design Information

2.4.1 Notes on standards

General standards for heating systems

Standards for structural and safety devices

Standards for heating water

Installation Instructions S1 Turbo | M1470113_en
The system must be installed and commissioned in accordance with the local fire and
building regulations. The following standards and regulations should always be ob‐
served:
EN 303-5
EN 12828
EN 13384-1
ÖNORM M 7510-1
ÖNORM M 7510-4
ÖNORM H 5170
ÖNORM H 5195-1
VDI 2035 Sheet 1
SWKI 97-1
D.P.R. no. 412
Boilers for solid fuels, manually and automatically fed combus‐
tion systems, nominal output up to 300 kW
Heating systems in buildings - Design of water-based heating
systems
Chimneys - Thermal and fluid dynamic calculation methods
Part 1: Chimneys serving one appliance
Guidelines for checking central heating systems
Part 1: General requirements and one-off inspections
Guidelines for checking central heating systems
Part 4: Simple check for heating plants for solid fuels
Heating installation - Requirements for construction and safety
engineering, as well as fire prevention and environmental pro‐
tection
Prevention of damage by corrosion and scale formation in
closed warm water heating systems at operating temperatures
up to 100 °C (Austria).
Prevention of damage in water heating systems - Scale forma‐
tion in domestic water heating systems and hot water heating
systems (Germany)
Water quality for heating, steam, cooling and air conditioning
systems (Switzerland)
Regulations for the planning, installation, running/operation and
maintenance of heating systems in buildings to reduce energy
consumption with reference to Article 4, Comma 4 of the Legis‐
lative Decree of 9 January 1991, No. 10 (Italy)
2
7