Assembly; Materials Supplied; Tools Required; Positioning - Froling S1 Turbo Installation Instructions Manual

4

4 Assembly

4.1 Materials supplied

4.1.1 Tools required

4.2 Positioning

18
The boiler comes on a pallet together with insulation, controller and accessories.
Some of the components come in cardboard packaging.
1 Boiler
2 Insulation
3 Controller
The following tools are required for assembling the S1 Turbo:
❒ Spanner or box wrench set (widths across flats 8 – 32 mm)
❒ Allen key set
❒ Flat head and cross-head screw drivers
❒ Hammer
❒ Diagonal cutting pliers
❒ Half-round file
❒ Power drill or cordless screwdriver with Torx bit insert
Damage to components if handled incorrectly
❒ Follow the transport instructions on the packaging.
❒ Transport components with care to avoid damage
❒ Protect the packaging against damp
❒ Pay attention to the pallet's centre of gravity when lifting
❒ Position a fork-lift or similar lifting device at the pallet and bring in the components
Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
Accessories (not pictured):
▪ Induced draught and seals
▪ Cleaning devices
NOTICE
Assembly
Materials supplied