General Valued Froling Partner Here at Froling we want to provide the environmentally friendly, economical and userfriendly energy system solutions that people want. This brochure presents our range and offers orientation for planning or implementation of heating systems, and contains the most current variants. We reserve the right to make technical changes without prior notice.
Energy systems The following pages provide a general description of the most important components and sensor functions used in the systems. Due to the wide range of programming options with the Lambdatronic S 3200, the sensor descriptions may vary for specific systems that have been adapted for customers.
General 2) Bus system 2.1) Heating circuit module Wall casing with board for controlling • 2 mixers • 2 heating circuit pumps • 2 analogue room sensors • Bus connection to main control • max. 8 units can be used per system A contact sensor for controlling a heating circuit is included.
Energy systems 3) Sensor functions for standard systems 3.1) Top store (sensor 0.1) • Heating circuit release for the connected heating circuits (standard value: 30°C) • Heat source for difference control of the DHW tank loading pump(s) • Start signal for automatic ignition •...
General 5) Connection instructions 5.1) HKP0 - output for oil/gas boiler connections To oil boiler control: floating contact for burner Core module release 5.2) Isolating valve If an isolating valve is connected to a speed-controlled pump outlet, an RC element must be used.
Page 23
Energy systems www.froeling.com P0220613_en...
Page 24
Better heating with log wood and combination systems from Froling Further technical details upon request. We will be pleased to assist and advise you. Heizkessel- und Behälterbau GesmbH A-4710 Grieskirchen, Industriestr. 12 AUT: Tel +43 (0) 7248 606 • Fax +43 (0) 7248 606-600 GER: Tel +49 (0) 89 927 926-0 •...
Need help?
Do you have a question about the S1 Turbo and is the answer not in the manual?
Questions and answers